COMBI519, 17th Edition Installation Testers, Multifunction

COMBI519

Advanced multifunction installation tester for verification of electric safety of private and industrial electric systems

COMBI519 carries out tests on electric systems in compliance with IEC/EN 61557-1 and therefore measurements of continuity of the protection cable, insulation resistance (with calculation of PI and DAR), overall earth resistance, RCDs type B, A and AC tripping time and current, line / fault impedance with calculation of prospective short circuit / fault current, phase sequence and conformity.

The instrument is provided with the innovative AUTO function: by selecting this function and only setting the value of RCD current, COMBI519 carries out tests of overall earth resistance, RCD tripping time and insulation resistance in a sequence. At the end of the test, the device shows all results with the indication of compliance or non-compliance with the standards with simple symbols OK or NOT OK.

The internal memory allows saving the measures and subsequently transfer them onto the PC through the optical/USB connection.

 

Functions
AUTO test (Non-trip ground resistance, RCD, Insulation) in sequence  
Insulation with voltage 50, 100, 250, 500, 1000VDC  
Measurement of polarization index P.I.  
Measurement of dielectric absorption ratio D.A.R.  
Continuity of protective circuit with 200mA  
Tripping time and current of RCDs type B, A, AC Standard, Selective and Delayed up to 1A B type up to 300mA
Non-trip earth resistance  
Loop/Line impedance Phase-Phase, Phase-Neutral, Phase-PE with high resolution (0.1mΩ) With optional accessory IMP57
Loop/Line impedance, Phase-Phase, Phase-Neutral, Phase-PE  
Percentage voltage drop on the line  
Contact voltage  
Phase sequence  
Help on line on the display  
Internal memory for measured data saving  
Optical/USB serial port for PC connection  
Protection rating  
Power supply  
Protection category CAT IV 300V
Weight in grams (batteries included) 1200
Size (LxWx H) (mm) 222x162x57
Guidelines
  • 17th edition
  • CEI 64-8
  • CE MARK
  • EN60909-0
  • IEC/EN61010-031
  • IEC/EN61010-1
  • IEC/EN61010-2-030
  • IEC/EN61010-2-033
  • IEC/EN61010-2-034
  • IEC/EN61187
  • IEC/EN61326-1
  • IEC/EN61557-1
  • IEC/EN61557-10
  • IEC/EN61557-2
  • IEC/EN61557-3
  • IEC/EN61557-4
  • IEC/EN61557-6

STANDARD ACCESSORIES

OPTIONAL ACCESSORIES