17th edition advanced installation tester with TouchScreen display and Wi-Fi compatible with APP HTANALYSIS™


17th edition advanced installation tester with TouchScreen display and Wi-Fi compatible with APP HTANALYSIS™

17th Edition multifunction installation tester with colour touch screen and WiFi connection to smartphones and tablets

  • All electric safety tests as required by 17th Edition.

  • Advanced Loop impedance measurement to verify MCBs, fuses and proper cable sizing.

  • Measurement of electric parameters insingle- phase installations (V,I, W, VAR, VA, PF).

  • Test of RCDs type A, AC, B up to 1A, also with separate clamp jaws with test current up to 10A (with optional accessory RCDX10).

  • Measurement of insulation resistance.

  • Measurement of continuity of protection conductors.

  • Verification of phase sequence (SEQ) and leakage currents.

  • Measurement of environmental paramemeters with external probes.

COMBIG2 checks the safety of domestic and industrial electric systems (17th edition).

Thanks to its characteristics, the user-friendly setting procedures, and the support to provide documentation and reports, COMBIG2 can satisfy even the most demanding technician and the most rigorous verifier. Its TFT colour display with capacitive touch-screen allows using this device in a brand-new way. COMBIG2 makes available on its display all possible variables to obtain a perfect measurement; your task will only be to “touch” what you really want to measure: then, simply leave the rest to COMBIG2's micro-processor.

COMBIG2 takes any measurement the installation safety guidelines require: RCDs type A, AC and B tripping time and current, insulation resistance, continuity of protection cables, non-trip earth resistance (at the power outlet, without tripping the RCD), line/fault impedance with prospective short-circuit/fault current calculation, tripping power and short-circuit thermal effect (I2t) relevant to MCB with curves B, C, D, K and fuses type gG and aM, leakage current, power, cosphi, harmonics, THD% and frequency (with optional clip clamp), 2-pole, 3-pole and steakless earth resistance measurement COMBIG2 can be used together with optional accessories to widen its operating fields: e.g. RCDX10 for testing RCDs with separate jaws up to 10A, IMP57 to perform high-current line/fault impedance measurements, etc. At the end of each safety test COMBIG2 indicates the compliance or non-compliance with requirements with simple symbols OK o NOT OK. Finally, thanks to the brand-new HTAnalysis App (free download for iOS and Android systems) COMBIG2 is capable of transferring measured and recorded data onto tablets and smartphones, thus giving the operator the possibility to customize and share through HTCloud test results.

AUTO test (Non-trip ground resistance, RCD, Insulation) in sequence  
Insulation with voltage 50, 100, 250, 500, 1000VDC  
Continuity of protective conductors with 200mA  
Tripping time and current of RCDs type B, A, AC Standard, Selective and Delayed up to 1A  
Tripping time and current of RCDs with separate clamp jaws type B, A, AC Standard, Selective and Delayed up to 10A With optional accessory RCDX10
Non-trip earth resistance  
Loop/Line impedance, Phase-Phase, Phase-Neutral, Phase-PE  
Loop/Line impedance Phase-Phase, Phase-Neutral, Phase-PE with high resolution (0.1mΩ) With optional accessory IMP57
Measurement of percentage voltage drop on the line  
Contact voltage  
Phase sequence  
Leakage current with optional clamp meter  
Measurement of Voltage, Current, Active, Reactive, Apparent Power  
Measurement of Cosphi, Power Factor  
Voltage and current harmonics up to the 49th with THD Up to 25th
Protection category CAT IV 300V
Measurement of environmental parameters (°C,°F, %RH, Lux)  
Test with remote lead PR400
Help on line on the display  
Internal memory for measured data saving  
Optical/USB serial port for PC connection  
Integrated WiFi connection and compatibility with HTANALYSIS App  
Size (LxWx H) (mm) 222x162x57
Weight in grams (batteries included) 1200
  • 17th edition
  • CEI 64-8
  • CEI 64-8 612.2
  • CEI 64-8 612.3 .4 .5
  • CEI 64-8 612.6.1
  • CEI 64-8 612.6.2
  • CEI 64-8 612.6.3
  • DPR 462 del 22/10/2001
  • EMC: IEC/EN61326
  • EN50522
  • EN61008
  • IEC/EN6090-0
  • IEC/EN61010-1
  • IEC/EN61557-1
  • IEC/EN61557-2
  • IEC/EN61557-3
  • IEC/EN61557-4
  • IEC/EN61557-6
  • IEC/EN61557-7
  • LVD 2014/35/EU
  • UNE20460
  • VDE 0100